Monetary Savings
No matter how many cows you have, if you can save just 2 bales a week in feeding or bedding at over $30 a bale, you save $60 or more per week. Talk to your neighbors to find out how many bales they save using a processor. The saving they report may surprise you.
Time Savings
Never again will you have to use your pitch fork to feed or bed your cattle. The processing time is as low as 2-3 minutes per bale, while carrying one bale on the forks and one bale in the tub. This would mean 5 to 10 minutes per day to feed and bed. In the winter months proper and timely bedding during calving season decreases mortality rates and protects your herd from frostbite.
Convenient and Affordable
The new Highline Bale Pro 4065 is processing its way into the yards of cattlemen across North America. From the manufacturer of the Bale Pro 8000, the NEW Bale Pro 4065 has been built for economy and efficiency.
- One feed roller ensures aggressive processing. The feed roller has a high pressure hydraulic motor and a proven chain drive system providing ample power for aggressive and positive bale rotation.
- The large diameter flail drum has fewer flails for easy start up. Any 55HP tractor with a 1000 RPM PTO and two hydraulic outlets with 1000 psi and 10 gpm will process a bale in as little as 2-3 minutes.
- The discharge has two adjustable doors to control the spread pattern. Lower the top door to feed into a windrow without any forage blowing away. The lower door can be raised for feeding into bunks or adjusted for bedding.
Benefits of the Highline Bale Pro 4065
- Reduce your bedding costs by up to 50%. Talk to any Highline processor owner and ask them how much they save on bedding.
- University studies prove that well bed cattle have improved weight gain as opposed to cattle that are not bed or slightly bed.
- Demo the Highline Bale Pro against any of the competition to see how evenly the Highline beds at a distance of over 50 ft.
- Reduce your feed costs by up to 30% by feeding in a windrow. There will be much less sorting, trampling or soiling of the feed. The feed ends up going where it is supposed to go… into the cows.
- When processed, the feed is digested without wasting energy… energy that will transform into weight gain.
- Removing dust, mold and mildew from feed lowers the risk of lung conditions in cattle.
- Less concentrate or supplement will be required when using the Highline Bale Pro to process your feed.
- Feeding the cattle in a different location each day will increase your land productivity and will keep cattle clean.
- Use the Bale Pro for mulching waterways to prevent erosion.
- With a 50% reduction in bedding material, corral cleaning expenses are reduced.
Highline features
- Bolt on tub
- Tempered spring steel flails that are contoured to fit the curve of the flail drum – virtually eliminating flail breakage
- Low profile Bale Pro 4065
- Only 55HP tractor required
- Adjustable hitch
- Clevis hitch optional
- Discharge deflector
- “Twine cutting rail”
- Easily adjustable feed grate
- Easily adjustable discharge deflector door
Specifications
| Tub Shape: | Low Profile, good visibility while backing up for loading. |
|---|---|
| Feed Roller: | Single Feed Roller on non-discharge side. Two types of lugs – long and wide lugs for turning the bale, shorter lugs for moving the bale forward. |
| Feed Roller Motor: | 1 hydraulic feed roller motor with multiplied power chain drive. |
| Front Screen: | 2”(5.08 cm) x 2”(5.08 cm) tubing. |
| Flails: | Flails are formed tempered spring steel. Flails are held in place using fine thread grade 8 carriage bolts with hardened bushings. |
| Twine Guards: | Axles / Feed roller bearing / Flail drum bearing. |
| Top Discharge Door: | Manual fold away design. Steel frame with Rubberized Tarpaulin cover. |
| Bottom Discharge Door: | Full length steel, adjustable. |
| Axles: | Removable spindles. |
| Driveline: | Standard 1000 RPM PTO Optional constant velocity PTO |
| Bale loading assembly: | Hydraulic lifting cylinder with single center pivot. |
| Forks: | 51.75" (131.45cm) long / 42" (106.68cm) spread. |
| Twine cutting rail: | Easy access through discharge. |
Warranty
A WARRANTY TO STAND BEHIND YOUR EQUIPMENT. Every piece of Highline equipment is built to last. Our innovative products have stood the test of time but to give you extra peace of mind, Highline offers a standard three year limited warranty.
- Three year warranty (1st year parts and labour, 2nd and 3rd year parts only)
Our warranty is your assurance that we stand behind our equipment. It is our commitment to build equipment that will help you do more. For more information on this or any Highline product, call (306) 258-2233 or 1-800-665-2010.
There are currently no posts in this category.